Hard disk drive (HDD) / solid state drive (SSD)
7.3.2
Installing 3.5-inch HDD modules
Customer Replaceable Unit
(CRU)
Tools: tool-less
7.3.2.1
Preliminary steps
Ê Locate the correct drive bay, see section
page
137.
7.3.2.2
Removing a 3.5-inch HDD dummy module
Figure 56: Removing the dummy module
Ê Press both tabs together (1) and pull the dummy module out of its bay (2).
V
CAUTION!
Keep the dummy module for future use.
Always replace dummy modules into unused HDD bays to comply with
applicable EMC regulations and satisfy cooling requirements.
138
Upgrade and Maintenance Manual
Hardware: 5 minutes
"3.5-inch HDD configurations" on
RX2530 M4