Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual page 294

Processor (CPU)
Figure 200: Removing the protective cover
Ê If applicable, remove the protective cover from the heat sink.
Ê If re-using a heat sink, clean residual thermal paste from the heat sink
surface using a lint-free cloth.
A
Figure 201: Installing the CPU frame on the heat sink (A)
Ê Place the CPU frame onto the heat sink. Make sure that the triangle marks
on heat sink (A) and on CPU frame (B) are on the same edge.
294 Upgrade and Maintenance Manual
B
RX2530 M4