12.4.2.3 Concluding steps
"Reassembling" on page 57
Ê
"Connecting the power cord" on page 63
Ê
"Switching on the server" on page 66
Ê
"Resuming BitLocker functionality" on page 98
Ê
12.4.3 Replacing memory modules
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver (for the riser module)
12.4.3.1 Preliminary steps
"Locating the defective server" on page 47
Ê
"Suspending BitLocker functionality" on page 77
Ê
"Shutting down the server" on page 49
Ê
"Disconnecting the power cord" on page 50
Ê
"Getting access to the component" on page 52
Ê
12.4.3.2 Replacing a memory module
Ê Prepare the memory module, see section
page
328.
Ê Remove the memory module, see section
page
330.
Ê Install the memory module, see section
page
329.
RX2530 M4
Upgrade and Maintenance Manual
Liquid cooling (LC)
Hardware: 5 minutes
"Preparing a memory module" on
"Removing a memory module" on
"Installing a memory module" on
331