Handling Sfp+ Transceiver Modules; Installing Sfp+ Transceiver Modules - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

Expansion cards and backup units
9.3

Handling SFP+ transceiver modules

A network adapter is equipped with one or two SFP+ (small form-factor
pluggable) transceiver modules. SFP+ transceiver modules are hot-pluggable.
9.3.1

Installing SFP+ transceiver modules

Upgrade and Repair Unit
(URU)
Tools: tool-less
Preparing the SFP+ transceiver module
Figure 116: Removing the protective cap
Ê Remove the SFP+ transceiver module from its protective packaging.
Ê Remove the protective cap from the new/additional SFP+ transceiver
module.
V
CAUTION!
– Always keep the protective caps attached to the SFP+ transceiver
modules and fiber-optic cable connectors until you are ready to
make a connection.
– Keep the protective cap for future use.
206 Upgrade and Maintenance Manual
Hardware: 5 minutes
RX2530 M4