Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual page 408

System board and components
Ê Select the Save & Exit menu.
Ê Select Save Changes and Exit or Save Changes and Reset.
Ê Verify that the Global Error indicator stops flashing.
"Resuming BitLocker functionality" on page 98
Ê
Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
I
Configuration of network settings should be performed by the
customer. For more information, see section
settings recovery" on page
Ê If applicable, restore LAN teaming configurations, see section
replacing a system board" on page
408
401.
105.
Upgrade and Maintenance Manual
"Note on network
"After
RX2530 M4