9.4.2
Removing the OCP module
Upgrade and Repair Unit
(URU)
Tool:
– Phillips PH1 / (+) No. 1 screw driver
9.4.2.1
Preliminary steps
"Shutting down the server" on page 49
Ê
"Disconnecting the power cord" on page 50
Ê
"Getting access to the component" on page 52
Ê
Ê Remove the riser module 3, see section
page
68.
9.4.2.2
Removing the OCP module
Figure 129: Removing the OCP module
Ê Remove the four screws (1).
I
When replacing an OCP module: keep the screws for installing the
new OCP module.
Ê Remove the OCP module (2).
RX2530 M4
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 5 minutes
"Removing a riser module" on
215