Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual page 378

System board and components
16.3.3.2 Removing the defective TPM
Ê Remove the TPM, see section
Ê Leave the TPM spacer on the system board when removing the defective
TPM.
16.3.3.3 Installing the new TPM
I
The TPM spacer is already present on the system board.
Ê Install the TPM, see section
16.3.3.4 Concluding steps
Ê Reinstall the system board, see section
page 405.
"Reassembling" on page 57
Ê
"Connecting the power cord" on page 63
Ê
"Switching on the server" on page 66
Ê
"Resuming BitLocker functionality" on page 98
Ê
I
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
378
"Removing the TPM" on page
"Installing the TPM" on page
Upgrade and Maintenance Manual
"Installing the new system board" on
373.
370.
RX2530 M4