Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual page 187

"Connecting the power cord" on page 63
Ê
"Switching on the server" on page 66
Ê
Ê For systems with 10x 2.5-inch HDD backplane (Combo):
If replacing a Combo backplane with revision ≤ C with a Combo backplane
with revision ≥ D:
Ê Update the iRMC S5 firmware to FW ≥ 1.25P, see section
recovering the BIOS and iRMC S5" on page
Ê Update the system configuration data using the Chassis ID Prom Tool,
see section
you select a system name with the extension "FW >= 1.25".
Figure 102: Example selection of system name
RX2530 M4
Hard disk drive (HDD) / solid state drive (SSD)
"Using the Chassis ID Prom Tool" on page
Upgrade and Maintenance Manual
"Updating or
82.
103. Ensure that
187