Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual page 349

14.3
Front VGA board
14.3.1 Installing the front VGA board
Upgrade and Repair Unit
(URU)
Tools: Phillips PH1 / (+) No. 1 screw driver
14.3.1.1 Preliminary steps
"Shutting down the server" on page 49
Ê
"Disconnecting the power cord" on page 50
Ê
"Getting access to the component" on page 52
Ê
"Removing the front panel module" on page 345
Ê
14.3.1.2 Removing the dummy cover
Figure 260: Removing the dummy cover
Ê Remove the dummy cover.
V
CAUTION!
Keep the dummy cover for future use. If you remove the front VGA board
again and do not replace it with a new one, the dummy cover must be
reinstalled to comply with EMC regulations and to satisfy cooling
requirements and fire protection measures.
RX2530 M4
Upgrade and Maintenance Manual
Hardware: 10 minutes
Front panel
349