Configuration With Up To 10 Hdd/Ssd Modules - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

7.4.3

Configuration with up to 10 HDD/SSD modules

I
SAS HDDs must not be populated above or below BC-SAS / BC-SATA
HDDs. In order to avoid this configuration, please make a free bay
intentionally.
For example, if only one SAS HDD or one BC-SAS / BC-SATA HDD is
ordered, this HDD will be installed in position 0 and position 1 will not be
used.
SAS HDDs and BC-SAS / BC-SATA HDDs can be mixed as long as SAS
HDDs are not populated above or below BC-SAS / BC-SATA HDDs.
The same kind of HDDs can be populated above or below each other.
Configuration with up to 10 HDD/SSD modules
Figure 68: Configuration with up to 10 HDDs/SSDs
Position Logical drive number
[0]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
RX2530 M4
Hard disk drive (HDD) / solid state drive (SSD)
ServerView RAID Manager display name
0 Vendor Product (0)
1 Vendor Product (1)
2 Vendor Product (2)
3 Vendor Product (3)
4 Vendor Product (4)
5 Vendor Product (5)
6 Vendor Product (6)
7 Vendor Product (7)
8 Vendor Product (8)
9 Vendor Product (9)
Upgrade and Maintenance Manual 151