Configuration With Up To Eight Hdd/Ssd Modules - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

7.4.2

Configuration with up to eight HDD/SSD modules

I
SAS HDDs must not be populated above or below BC-SAS / BC-SATA
HDDs. In order to avoid this configuration, please make a free bay
intentionally.
For example, if only one SAS HDD or one BC-SAS / BC-SATA HDD is
ordered, this HDD will be installed in position 0 and position 1 will not be
used.
SAS HDDs and BC-SAS / BC-SATA HDDs can be mixed as long as SAS
HDDs are not populated above or below BC-SAS / BC-SATA HDDs.
The same kind of HDDs can be populated above or below each other.
Configuration with onboard SATA/sSATA controller
Onboard SATA controller
Figure 66: Configuration with up to eight HDDs/SSDs (onboard controller)
Logical drive
Position
number
LSI Embedded MegaRAID (0)
0
[0]
1
[1]
2
[2]
3
[3]
LSI Embedded MegaRAID (1)
4
[4]
5
[5]
6
[6]
7
[7]
RX2530 M4
Hard disk drive (HDD) / solid state drive (SSD)
ServerView RAID Manager display name
Vendor Product (0)
Vendor Product (1)
Vendor Product (2)
Vendor Product (3)
Vendor Product (0)
Vendor Product (1)
Vendor Product (2)
Vendor Product (3)
Upgrade and Maintenance Manual
Onboard sSATA controller
149