Replacing The M.2 Ssd - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

9.5.5.2

Replacing the M.2 SSD

Ê Remove the PDUAL AP200, see section
page 231.
Figure 156: Removing the M.2 SSD (A)
Ê Remove the screw (see circle) of the defective M.2 SSD at the bottom side
(1).
I
You can use the iRMC web interface or the ServerView RAID
manager to detect the defective M.2 SSD.
Ê Pull the bolt out of the hole (2).
Ê Remove the bolt (3).
RX2530 M4
Upgrade and Maintenance Manual
Expansion cards and backup units
"Removing the expansion card" on
241