Removing Backup And Optical Disk Media; Verifying And Configuring The Backup Software Solution - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

Basic software procedures
5.1.3

Removing backup and optical disk media

Ê Ask the system administrator to eject all remaining backup or optical media
from the backup or optical disk drive before removing it from the server.
Ê If the backup media cannot be ejected by conventional means, and it is
mandatory that the cartridge be removed prior to returning the drive for
repair or disposing it, a manual tape extraction needs to be performed.
For more information on "forcible" tape ejection, see the "Tape Facts" pages
available to Fujitsu service partners from the following https address:
https://partners.ts.fujitsu.com/com/service/ps/Servers/PRIMERGY/Pages/
TapeFacts.aspx
For Japan:
Please contact Fujitsu support, if "forcible" tape ejection is necessary.
I
Fujitsu does not assume responsibility for any damage to the tape
drive, the data cartridge/tape or for the loss of any data resulting from
manual tape extraction procedures.
5.1.4 Verifying and configuring the backup software
solution
I
This task only applies to Japan.
Depending on the backup software solution, it may be necessary to disable or
delete the backup drive from the backup software drive list before starting the
maintenance task.
I
For more information on suitable backup software solutions and related
documentation, see the Fujitsu web pages.
80 Upgrade and Maintenance Manual
RX2530 M4