Preliminary Steps; Removing The Defective Fjbu; Installing The New Fjbu; Concluding Steps - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

V
CAUTION!
In case of not enough space at the under side, unlock the CMA
stopper of the server below and pull out the CMA to the rear side.
Ê Remove the CMA stopper with the mounted crossbar (see figure 40).
Ê Hold the CMA stopper, the crossbar and the CMA including cables in the one
hand.
Ê Remove the FJBU and install the new FJBU carefully.
Ê Mount the complete assembly (CMA stopper, the crossbar and the CMA)
again into the rail.
6.3.3.1

Preliminary steps

"Locating the defective server" on page 47
Ê
6.3.3.2

Removing the defective FJBU

Ê Remove the FJBU, see
6.3.3.3

Installing the new FJBU

Ê Install the FJBU, see section
6.3.3.4

Concluding steps

Ê No steps needed.
RX2530 M4
"Removing an FJBU" on page
"Installing an FJBU" on page
Upgrade and Maintenance Manual
Power supply unit (PSU)
125.
124.
127