Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual page 235

"Enabling replaced components in the BIOS" on page 93
Ê
Ê Inform the customer about changed WWN, MAC and SAS addresses, see
"Looking for MAC/WWN/GUID and SAS addresses" on page
"Updating the NIC configuration file in a Linux and VMware environment" on
Ê
page 97
"Updating expansion card firmware" on page 85
Ê
"Resuming BitLocker functionality" on page 98
Ê
Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
I
Configuration of network settings should be performed by the
customer. For more information, see section
settings recovery" on page
Ê If applicable, restore LAN teaming configurations, see
replacing/upgrading LAN controllers" on page
RX2530 M4
233.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Note on network
"After
105.
100.
235