Completing The Maintenance Task; Updating Or Recovering The Bios And Irmc S5; Updating Or Recovering The Bios - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

Basic software procedures
5.2

Completing the maintenance task

5.2.1

Updating or recovering the BIOS and iRMC S5

I
For Japan:
Follow the instructions provided separately.
After replacing the system board, memory or a CPU, it is essential to upgrade
the BIOS and iRMC to the latest version. The latest BIOS and iRMC versions
are available from the Fujitsu support internet pages at:
http://ts.fujitsu.com/support/
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/
I
Note on the boot watchdog
Before updating or recovering the BIOS and iRMC, ensure that the boot
watchdog is disabled, see section
page 78.
After updating or recovering the BIOS and iRMC, enable the boot
watchdog again, see section
I
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from BIOS updates.
5.2.1.1

Updating or recovering the BIOS

BIOS flash procedure
Ê Perform the BIOS flash procedure as described in the "BIOS Setup Utility"
reference manual of your server.
BIOS recovery procedure
Ê Perform the BIOS recovery procedure as described in the "BIOS Setup
Utility" reference manual of your server.
82
"Enabling the boot watchdog" on page
Upgrade and Maintenance Manual
"Disabling the boot watchdog" on
92.
RX2530 M4