Preparing The Riser Holder - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

Expansion cards and backup units
9.6.2.2

Preparing the riser holder

Figure 177: Removing the riser card - example riser module 3
Ê Remove the two screws (see circles).
Ê Remove the riser card.
Figure 178: Installing the riser card - example riser module 3
Ê Insert the riser card.
Ê Fasten the riser card with two screws (see circles).
Upgrade and Maintenance Manual 259
RX2530 M4