Inch Hdd/Ssd Configurations; Configuration With Up To Four Hdd/Ssd Modules - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
7.4

2.5-inch HDD/SSD configurations

7.4.1

Configuration with up to four HDD/SSD modules

I
SAS HDDs must not be populated above or below BC-SAS / BC-SATA
HDDs. In order to avoid this configuration, please make a free bay
intentionally.
For example, if only one SAS HDD or one BC-SAS / BC-SATA HDD is
ordered, this HDD will be installed in position 0 and position 1 will not be
used.
SAS HDDs and BC-SAS / BC-SATA HDDs can be mixed as long as SAS
HDDs are not populated above or below BC-SAS / BC-SATA HDDs.
The same kind of HDDs can be populated above or below each other.
Figure 65: Configuration with up to four 2.5-inch HDDs/SSDs
Position Logical drive number ServerView RAID Manager display name
[0]
[1]
[2]
[3]
148
0 Vendor Product (0)
1 Vendor Product (1)
2 Vendor Product (2)
3 Vendor Product (3)
Upgrade and Maintenance Manual
RX2530 M4