Replacing The 4X 2.5-Inch Hdd Backplane (Left Side); Preliminary Steps - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

7.4.11 Replacing the 4x 2.5-inch HDD backplane (left side)

Field Replaceable Unit
(FRU)
Tools: tool-less

7.4.11.1 Preliminary steps

"Locating the defective server" on page 47
Ê
"Shutting down the server" on page 49
Ê
"Disconnecting the power cord" on page 50
Ê
"Getting access to the component" on page 52
Ê
Ê Release all HDD/SSD modules and pull them out a few centimeters, see
section "Removing a 2.5-inch HDD/SSD module" on page
V
CAUTION!
The HDD/SSD modules need not to be removed completely. But if
you want to remove them nevertheless, check if all HDD/SSD
modules are uniquely identified so that you can reinsert them into
their original bays.
Ê Release all dummy modules and pull them out a few centimeters, see
section "Removing a 2.5-inch HDD/SSD dummy module" on page
RX2530 M4
Hard disk drive (HDD) / solid state drive (SSD)
Upgrade and Maintenance Manual
Hardware: 10 minutes
160.
156.
171