Concluding Steps - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
Figure 76: Installing the 2.5-inch HDD/SSD module
Ê Insert the HDD/SSD module into a drive bay and carefully push back as far
as it will go (1).
Ê Close the locking lever to lock the HDD/SSD module in place (2).
Ê When using a RAID array, add the additional HDD/SSD to the RAID array.
I
Configuring the RAID array, see the documentation of the RAID
controller, used in your configuration, see section
overview" on page
7.4.4.4

Concluding steps

No steps needed.
158
31.
Upgrade and Maintenance Manual
"Documentation
RX2530 M4