Upgrading Configuration From Up To Four To Up To Eight 2.5-Inch Hdds/Ssds; Preliminary Steps; Removing The Odd Lock - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

7.4.14 Upgrading configuration from up to four to up to
eight 2.5-inch HDDs/SSDs
Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
All data on all HDDs/SSDs in the array will be lost when deleting the
RAID array! Be sure to back up your data before deleting a RAID array.
For more information, see the "ServerView Suite RAID Management"
user guide.
I
After installing or removing an additional backplane, never forget to
change the system information using the Chassis ID Prom Tool.

7.4.14.1 Preliminary steps

"Shutting down the server" on page 49
Ê
"Disconnecting the power cord" on page 50
Ê
"Getting access to the component" on page 52
Ê

7.4.14.2 Removing the ODD lock

Ê If an ODD has been installed, remove the ODD, see section
ODD" on page
Figure 103: Removing the ODD lock (A)
Ê Push the ODD lock in direction of the arrow.
RX2530 M4
Hard disk drive (HDD) / solid state drive (SSD)
339.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing the
189