Expansion cards and backup units
9.2
Handling slot brackets
9.2.1
Installing a slot bracket
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
I
Use the low profile bracket perforated for relevant controllers.
No bracket needed for installing the HDD controller in slot 1 of riser
module 1 (see figure 136).
Figure 114: Perforated and non-perforated slot brackets
1
Full height bracket non-perforated
2
Full height bracket perforated
3
Low profile bracket perforated
Installing the slot bracket
Ê Place the controller on the mounting tabs on the slot bracket.
Ê Fasten the slot bracket to the controller with two screws.
204
Upgrade and Maintenance Manual
Hardware: 5 minutes
RX2530 M4