Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual page 425

iRMC-related status signals
ID indicator
blue flashing
blue flashing
HDD/SSD prefailure detection
Depending on your hardware configuration HDD/SSD prefailure detection will
be supported.
The requirements are:
– iRMC S5 Firmware 1.2 or later
– supported OOB RAID system
17.2.2.2 Indicator on the ODD
I
ODDs may have an indicator or not.
Figure 317: Example: Indicator on the ODD
Pos. Indicator
Activity
1
indicator
RX2530 M4
Global error
indicator
off
orange flashing
Status
off
green on
Upgrade and Maintenance Manual
Description
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
An emergency flash of the iRMC firmware
is in progress.
Description
The ODD is inactive.
The storage medium is being accessed.
Appendix A
425