Switching Off The Id Indicator; Performing A Fan Test - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

Basic software procedures

5.2.19 Switching off the ID indicator

Press the ID button on the front panel, or use the iRMC web interface or
ServerView Operations Manager to switch off the ID indicator after the
maintenance task has been concluded successfully.
I
For more information, see section
page 47 or the "ServerView Suite Local Service Concept (LSC)" and
"iRMC S5 - Web Interface" user guides.
Using the ID button on the front panel
Ê Press the ID button on the front panel to switch off the ID indicators.
Using the ID icon in the RMC web interface
Ê Log in to the iRMC S5 web interface.
The icon that represents the ID indicator LED resides on the right of the
menu bar. Its color symbolizes its status:
blue: the ID LED is on.
grey: the ID LED is off
Ê Click the icon to switch the ID indicator LED on or off.
Using ServerView Operations Manager
Ê In ServerView Operations Manager Single System View and press the
Locate button in the title bar to switch off the ID indicator.

5.2.20 Performing a fan test

I
Notes on replacing a defective fan
After replacing a defective system fan or PSU containing a defective fan,
the fan error indicators will stay lit until the next fan test. By default, a fan
test is automatically started every 24 hours. The first automatic fan test
being performed after replacing a fan will turn off the fan error indicator.
If you want to start the fan test manually, you can do so by following the
description below:
106 Upgrade and Maintenance Manual
"Locating the defective server" on
RX2530 M4