Expansion cards and backup units
Figure 182: Routing the FBU cable
Ê Route the FBU cable as shown in the figure.
9.6.2.5
Concluding steps
Ê Install the riser module 3, see section
"Reassembling" on page 57
Ê
"Connecting the power cord" on page 63
Ê
"Switching on the server" on page 66
Ê
I
The recalibration of the FBU starts automatically, and finishes within a
few minutes.
262
Upgrade and Maintenance Manual
"Handling riser modules" on page
67.
RX2530 M4