Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual page 429

Hide thumbs Also See for PRIMERGY RX2530 M4:
Table of Contents

Advertisement

Pos. Indicator
CSS
3
indicator
I
Note on CSS and Global Error indicators on the I/O panel:
If CSS and Global Error indicators are located in the same place on the
I/O panel of the server, also check the indicators on the front panel to
determine if a CSS or Global Error event has been detected.
I
For more information on detected errors, see the System Event Log or
use the ServerView Operations Manager or iRMC web interface.
iRMC-related status signals
ID indicator
blue flashing
blue flashing
I
For more information, see section
iRMC S5" on page
HDD prefailure detection
Depending on your hardware configuration HDD prefailure will be supported.
The requirements are:
– iRMC S5 Firmware 1.2 or later
– supported OOB RAID system
RX2530 M4
Status
Description
off
No critical event detected (CSS component).
Prefailure event detected (CSS component).
orange
For HDDs see also
on
on page 429
flashing
CSS component failure detected.
orange
Global error
indicator
off
orange flashing
82.
Upgrade and Maintenance Manual
"HDD prefailure detection"
Description
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
An emergency flash of the iRMC firmware
is in progress.
"Updating or recovering the BIOS and
Appendix A
429

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents