Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual page 337

13.1.2.3 Installing the ODD
Ê If no ODD has been installed before:
Ê Remove the two screws and take the ODD latch from the fan bridge (see
figure 242).
Figure 245: Installing the ODD latch on the ODD
Ê Fasten the ODD latch with two screws to the rear side of the ODD.
Figure 246: Installing the ODD
Ê Push the ODD into the bay (1) simultaneously pressing the front of the ODD
slightly down until the ODD latch engages (2).
RX2530 M4
Upgrade and Maintenance Manual
Accessible drives
337