Hardware Setup; Wall Mounting And Din Rail Assembly - Omega iServer 2 Series User Manual

3 Hardware Setup

The iServer 2 can be assembled to be mounted in a variety of ways. Refer to the following sections for
instructions on how to assemble the hardware for different applications. The physical reset button is
located on the left side of the iServer 2 unit as shown in the figure below.

3.1 Wall Mounting and DIN Rail Assembly

All models of the iServer 2 are wall-mountable and come with an optional DIN rail bracket. The
distance between the two wall-mounting screw holes is 2 ¾" (69.85 mm). To attach the DIN rail
bracket hardware, locate the two screw holes on the underside of the unit and use the two
included screws to secure the bracket in place as indicated in the figure below:
Wall-mount
screw hole
Figure 1: DIN Rail Bracket and wall mount screw holes
DIN rail
bracket
Reset button
Wall-mount
screw hole
5 | M 5 7 9 1