6.4 Alarm Light
The 'Alarm Light' function
allows the operator to select
whether the red light on the
front of the display panel
flashes when an alarm occurs
on the network. Press
"ENTER" to change the alarm
light function.
The alarm light on the display
can be set either to flash when
an alarm occurs on the
network by selecting 'Enable
Alarm Light' or to stay off by
selecting 'Disable Alarm
Light'. Highlight desired
option and press "ENTER" or
"EXIT" to leave the option
unchanged.
Figure 175: Alarm Light Option
Figure 176: Disable/Enable Alarm
Sentry Control System 97