3.7.1 View Offsets
This submenu allows the
operator to 'View' the
temperature and humidity
offsets, or by selecting
'Change' to calibrate the
sensor. The cursor can be
moved by pressing the up and
down arrow keys, and pressing
"ENTER" to execute the
desired function. Pressing the
"EXIT" key will return to the
'Machine' menu.
To view a machine's sensor
offsets, highlight the desired
machine using the arrow keys.
If there are too many machines
to fit on one screen, press the
"PAGE UP/DOWN" keys to
see the next page of machines.
Press "ENTER" to display the
highlighted machine's sensor
offset, or "EXIT" to return to
the 'Calibration' submenu.
42 Sentry Control System
Figure 67: View Offsets
Figure 68: Machine List