Figure 19: Password Entry; Figure 20: Machine List - Jamesway Sentry Manual

If password security is
enabled, the operator is
requested to enter the
password after selecting the
desired group of machines. An
incorrect password denies
entrance to the 'Profile
Editing' function.
Once the 'Edit Profile'
function has been selected
from the profile submenu, the
operator is asked to select the
machine for the profiles they
would like to edit. The cursor
can be moved one machine at a
time by using the arrow keys,
or it can be moved a full
screen by using the "PAGE
UP/DOWN" keys. The
"HOME" and "END" keys
move the cursor to the
corresponding point in the
machine list.
When the cursor is
highlighting the desired
machine, press "ENTER" to edit the profiles of the selected machine, or press "EXIT" to return to the
profile submenu.
18 Sentry Control System

Figure 19: Password Entry

Figure 20: Machine List