Figure 60: Alarm Override Option; Figure 59: Duration Of Override - Jamesway Sentry Manual

This dialog box shown at right
asks for the duration of the
alarm override. The default
value shown under the cursor
can be used by pressing
"ENTER", or a new value can
be entered using the numeric
keys and the "CLEAR" key to
delete the last digit. Only times
within the range of 0.1 hours
(6 minutes) to 24.0 hours are
accepted. An 'Entry Error'
message is displayed if the
entered value is outside this
range. Pressing "EXIT" will
return to the submenu without

Figure 59: Duration of Override

making any changes to the
alarm override.
The operator selects which
alarm(s) are to be overridden
by moving the cursor to the
alarm mode field and pressing
"SELECT" to toggle the field
between 'Normal' and
'Override'. Once the
appropriate alarms have been
selected, press "ENTER" to
continue, or "EXIT" to abort
changes and return to the
machine selection screen.

Figure 60: Alarm Override Option

38 Sentry Control System