Figure 118: Alarm Range Setup; Figure 119: Send Alarm Ranges - Jamesway Sentry Manual

Here the operator can edit the
temperature and humidity
Alarm ranges for all machines
of a specified type. The default
temperature value shown
under the cursor can be used
by selecting "ENTER", or a
new value can be entered using
the numeric keys and the
"CLEAR" key to delete the
last digit. Accepted values are
between 0.2 and 0.7 degrees
for temperature (high range)
and 0.2 and 2.0 (low range),
and 2.0 and 10.0 for humidity
(both high and low range). An
'Entry Error' message is
displayed if the entered value is outside this range. Pressing "EXIT" will return to the previous submenu
without making any changes to the Alarm Range setup.
Once the desired Alarm
Ranges have been entered, the
operator has two options:
'Abort' returns to the previous
screen without altering the
Alarm Range setup, and 'Send
Alarm Range' sends the new
values to all machines of a
specific type connected to the
network and activates the new
Alarm Range values
immediately.
68 Sentry Control System

Figure 118: Alarm Range Setup

Figure 119: Send Alarm Ranges