The operator may now choose
to either abort or set a new
time by selecting 'Change
Time' and pressing "ENTER".
The new time will take after
the "ENTER" key is pressed.
The "EXIT" key can be used
to abort without changing the
time.
5.2.2 Set Date
The 'Set Date' function allows
the current date to be changed.
This will change the date on all
display panels and machine
controllers. Machine
controllers will automatically
calculate the new 'day in cycle'
corresponding to this new
date.
Select the function and press
"ENTER" to change the date.
Press "EXIT" to return to the
previous menu.
60 Sentry Control System
Figure 102: Send Time
Figure 103: Set Date