Figure 112: Alarm Setup Editing; Figure 113: Machine Type - Jamesway Sentry Manual

This screen displays all of the
alarms that can occur for the
selected machine type. The
'Delay Before Alarming' and
'Alarm Delay After
Acknowledge' fields can be
changed by highlighting the
desired location with the
cursor and then typing in a
new number. Fields in the
'Alarm' column can be toggled
between 'Normal', 'Disabled'
and 'Bell Off' using the
"SELECT" key. Press "ENTER"
to continue to the next step, or
press "EXIT" to abort without
making any changes. Refer to
the 'Alarm Setup' section on Page 25 for a more complete description of this screen.
The operator can choose to
send the new alarm setup to all
machines of the selected type,
or the alarm setup can be sent
to a specific machine. The
second option is especially
useful for copying an alarm
setup from one machine to
another machine. Use the "UP"
and ''DOWN" arrow keys to
make a choice and press
"ENTER" to continue, or
"EXIT" to abort. If 'Specific
Machine' is chosen go to the
next step, or skip to the screen
shown in Figure 115.

Figure 112: Alarm Setup Editing

Figure 113: Machine Type

Sentry Control System 65