Figure 196: Select Specific Machine; Figure 197: Sample Time Editing - Jamesway Sentry Manual

This screen is shown only if
'Specific Machine' was chosen
in the previous step. Use the
arrow keys to highlight the
machine whose line sample
time should be changed. Press
"ENTER" to continue to the
next step, or "EXIT" to abort
and return to the graph menu.
The time interval can be set to
one of the choices shown in
the dialog box. The left
column indicates the number
of minutes between recording
of environmental values, the
middle column indicates how
many hours per division would
be displayed on the line graph,
and last column shows how
many days of data will be
shown on the line graph for
each selection. Highlight the
desired time interval and press
"ENTER" to continue, or
"EXIT" to leave the sampling
time unchanged.
NOTES: a) After changing the sample time, there will be no indication on the line graph that it was
changed, the machine will just add points at a different rate. b) When the dialog box is first displayed,
the cursor does not indicate what the current sampling time is.
108 Sentry Control System

Figure 196: Select Specific Machine

Figure 197: Sample Time Editing