The operator may now choose
to either abort, or set the new
date by selecting 'Change
Date' and pressing "ENTER".
The new date will take effect
after the "ENTER" key is
pressed. The "EXIT" key can
be used to abort without
changing the date.
5.3 Network Machine Setup
The Network 'Machine Setup'
function is similar to the one
found under the 'Machine'
menu, except that this function
will edit the various aspects of
'Machine Setup' for all
machines of a given type. To
change any aspect of
'Machine Setup' for one
machine only, refer to section
3.5 on page 18. The Network
'Machine Setup' menu
provides access to the 'Alarm
Setup', 'Alarm Ranges', 'Turn
Setup', 'Humidity Control', and
'JM Fan' and JM Cool Setup'
(for hatcheries running JM
Machines). Pressing "ENTER" brings up a list of the six submenus listed above.
62 Sentry Control System
Figure 106: Send Date
Figure 107: Machine Setup