Reports; Screen Report; Figure 82: Screen Report; Figure 83: Machine Type - Jamesway Sentry Manual

Reports

4

4.1 Screen Report

The functions under the
'REPORTS' menu allow a
summary of machine activity to
be displayed on the screen or
sent to a printer attached to the
display panel. All reports are
obtained by highlighting
'REPORTS' using the left and
right arrow keys, and then
pressing "ENTER" (if the
different report functions are
not yet shown). The first
function is the 'Screen Report'
which displays the machine
summary.
A submenu appears prompting
the operator to select the
machine type to be reported.
The 'Incubators' option refers
to all multi-stage incubators
(tunnel machines), 'Hatchers'
refers to common wall or
PX-Hatchers, and the ACI
types refer only to the
single-stage machines.
Choosing the 'All' option
displays all machines on the
network. Choose the machine
types for which reports are
required by highlighting the
choice using the up and down
arrow keys, and then pressing
"ENTER". Pressing "EXIT" will return to the 'Reports' menu.
50 Sentry Control System

Figure 82: Screen Report

Figure 83: Machine Type