Display
6
6.1 Temperature
The 'DISPLAY' menu contains
functions which only have an
effect on the local display
panel, and do not affect any
other display panels connected
to the network. Most of the
functions select preference
settings for the display panel,
such as temperature and
humidity units or to select the
language preference. Highlight
the desired function and press
"ENTER" to continue. The
'Temperature' function selects
the temperature units, degrees
Fahrenheit or degrees Celsius,
used for displaying and
entering of temperature and humidity values when it is set for wet bulb reading.
Temperature on the display
can be in degrees Fahrenheit or
degrees Celsius. This also
applies to entering of setpoints.
If Humidity is displayed in
degrees wet bulb (see Section
6.2 on following page), this
units selection will also apply
to the humidity readings.
Move the cursor to desired
preference and press
"ENTER", or "EXIT" to leave
the preference unchanged.
94 Sentry Control System
Figure 169: Temperature Option
Figure 170: Temperature Units