Printer Report; Figure 84: Machines List; Figure 85: Printer Report - Jamesway Sentry Manual

This report shown at right
displays all of the
environmental operating
values for the selected
machines. Current setpoints
and actual values for
temperature, humidity and
damper position are displayed.
Temperature and humidity are
displayed in the units selected
under the 'Display' menu
options. The operator can
move through the list using the
keys listed at the bottom of the
screen. Pressing the "DOWN"
arrow key when the cursor is at
the bottom of the screen will
move the whole list up by one line to make room for the next machine. To view a machine's
complete status, highlight the unit and press "ENTER". This displays the machine status screen as
explained on Page 4. With version 1.23 or later, the screen also displays the profile status of each
machine. Pressing the "SELECT" key at any point brings up a menu of commonly used functions that
can be used to edit the configuration of the selected machine.

4.2 Printer Report

Selecting this function will
create the same type of report
that the 'Screen Report'
produces, except the report is
sent to an attached printer
instead of the screen. Press
"ENTER" for the machine type
selection submenu.

Figure 84: Machines List

Figure 85: Printer Report

Sentry Control System 51