Network Alarm Setup; Figure 108: Alarm Setup; Figure 109: Machine Type - Jamesway Sentry Manual

5.3.1 Network Alarm Setup

This 'Alarm Setup' function is
similar to the one found under
the 'MACHINE' menu, except
that this function can edit the
alarm setup for all machines of
a given type. This function can
also be used to copy the alarm
setup from one machine to
another if they are of the same
type. Press "ENTER" to
display the submenu showing
the different machine types. To
change the alarm setup on one
machine only, refer to the
'Alarm Setup' section on
Page 25.
This submenu displays the
different machine types. Select
the type of machine by moving
the cursor to the appropriate
line via the arrow keys, and
press "ENTER" to continue, or
"EXIT' to return to the
previous menu.
NOTE: Some of the machine
types may not be available on
the network. An error message
will be shown informing that
no machines of that type were
found on the network if such a
machine type is selected.

Figure 108: Alarm Setup

Figure 109: Machine Type

Sentry Control System 63