Figure 27: Machine List; Figure 28: Select Profile To Start - Jamesway Sentry Manual

Once the 'Start Profile'
function is selected, the
operator is asked to select the
machine for which they would
like to commence a profile.
The cursor can be moved one
machine at a time using the
arrow keys, or moved a full
screen by using "PAGE UP/
DOWN" keys. The "HOME''
and "END" keys move the
cursor to the corresponding
point on the machine list.
When the desired machine is
highlighted, press "ENTER" to
start a profile on the selected
machine, or "EXIT" to abort
the function.
A dialog box showing the
profile slot usage for the
selected machine is displayed.
Select the profile to commence
by moving the cursor to the
slot number using the arrow
keys and press "ENTER".
Only 'Valid' profiles can be
chosen; an error message is
displayed if an 'Unused' slot is
chosen.
22 Sentry Control System

Figure 27: Machine List

Figure 28: Select Profile to Start