3.5.1 Alarm Setup
Alarm setup allows the
operator to individually
program each machine to react
to specific alarm conditions.
For each alarm setting, the time
before alarming, and delay after
acknowledgment can be
programmed. Each alarm can
also be disabled as desired. To
change the alarm setup on a
particular machine, enter this
menu. To change the alarm
setup of all machines of the
same type, refer to the section
on Network Alarm Setup on
Page 63.
If password security is
enabled, the user is requested
to enter a password after
selecting the desired group of
machines. An incorrect
password denies entrance to
the 'Alarm Setup' screen.
Figure 33: Alarm Setup
Figure 34: Password Entry
Sentry Control System 25