Figure 138: Machine List; Figure 139: Profile List - Jamesway Sentry Manual

Once the 'Edit Profiles'
function has been selected, the
operator is asked to select the
machine from which the
profile should be retrieved for
editing. The selected machine
will not necessarily receive the
new profile when it is stored,
depending upon the selection
made in the sending step.
Highlight desired machine
using the arrow keys and the
"PAGE UP/DOWN" keys to
display machines not shown,
and press "ENTER" to
continue, or "EXIT" to abort
without making changes.
Once the operator has selected
the machine, a dialog box
appears displaying the usage of
the 20 profile slots the
machine can use for storage.
Use the arrow keys to select a
slot containing the profile to be
retrieved. Choosing an
'Unused' slot will bring up an
empty profile. Press "ENTER"
to retrieve the profile from the
selected machine, or "EXIT"
to return to the machine
selection screen.
With software version 1.20
and above, use the "CLEAR"
key to erase the currently
selected profile. If this profile is active, it will not be erased.
78 Sentry Control System

Figure 138: Machine List

Figure 139: Profile List