Network Profiles; Figure 134: Send Alarm Override; Figure 135: Profiles - Jamesway Sentry Manual

Once the appropriate alarms
have been selected, the
operator has three options:
'Abort' returns to the previous
screen without affecting
machine operation, 'Send
Override' sends override to all
machines of the selected type,
where it is stored without
activating the override, or
'Send & Activate Override'
which sends new values to the
machine(s) and activates the
specified alarm override
immediately.

Figure 134: Send Alarm Override

NOTE: if alarm override was
already active when sending
the new override ('Send Override' option), then the new setup is used and override time remaining is
re-calculated taking into account how long the override has already been active. If the override has been
active longer than what the new override time is, then the override will become inactive. "EXIT" returns
to the previous screen without making changes.

5.5 Network Profiles

The 'Network Profiles' menu
offers three functions: 'Edit
Profile' can be used to change
a profile on all machines of a
given machine type, 'Copy
Profile' copies a profile from
one machine to another
machine, and 'Copy All'
transfers all profiles from one
machine to one or more other
machines. The copy functions
are useful to reprogram a
machine after its processor
circuit board (PTA410) has
been replaced at a machine
controller.

Figure 135: Profiles

76 Sentry Control System