Change Calibration; Figure 69: View Sensor Offsets; Figure 70: Change Offsets - Jamesway Sentry Manual

The screen shown at right
displays the sensor offsets for
the selected machine. Offsets
can be both positive or
negative. When a machine
controller receives a
temperature or humidity
reading from the intelligent
sensor module (ISM), it adds
the corresponding offset. This
corrected value is then used for
control and shown on the
display panel. The temperature
offset is shown in °F or °C,
depending on the current
temperature option. The
humidity offset is always
shown in the units of the sensor's humidity sensor, and is not converted to the display's humidity option.
Press "EXIT" to return to the machine selection screen.

3.7.2 Change Calibration

This function is used to adjust
a machine's calibration
parameters. Use the up and
down arrow keys to select
'Change Offsets' and press
"ENTER" to continue.

Figure 69: View Sensor Offsets

Figure 70: Change Offsets

Sentry Control System 43