Figure 49: Password Entry; Figure 50: Machine List - Jamesway Sentry Manual

If password security is
enabled, the user is requested
to enter a password after
selecting the desired group of
machines. An incorrect
password denies entrance to
the 'Humidity Control' setup
screen.
Once the operator has selected
the desired group of machines,
they are asked to select the
machine for which they would
like to edit the 'Humidity
Control'. The cursor can be
moved one machine at a time
using the arrow keys, or it can
be moved a full screen by
using the "PAGE UP/DOWN"
keys. The "HOME" and
"END" keys move the cursor
to the corresponding point in
the machine list.
When the cursor is
highlighting the desired
machine, press "ENTER" to
edit the 'Humidity Control' for the selected machine, or press "EXIT" to abort the function.

Figure 49: Password Entry

Figure 50: Machine List

Sentry Control System 33