Here the operator can edit the
turn setup for all machines of a
specified type. The default
variables shown under the
cursor can be used by selecting
"ENTER", or new variables
can be entered using the
"SELECT" key. Egg Turning
can be enabled or disabled.
Egg turning can be disabled
between day 14 and day 18.
The Egg Turn interval can be
set to either 15, 30, 45, 60, 90,
or 120 minutes. Pressing
"EXIT" will return to the
previous submenu without
making any changes to the turn
setup.
Once the desired Egg Turning
variables have been entered,
the operator has two options:
'Abort' returns to the previous
screen without altering the turn
setup, and 'Send Turn Setup'
sends the new values to all
machines of a specific type
connected to the network and
activates the new egg turn
variables immediately.
70 Sentry Control System
Figure 122: Edit Egg Turn Setup
Figure 123: Send Turn Setup