Figure 45: Machine Selection; Figure 46: Edit Egg Turn Setup - Jamesway Sentry Manual

Once the operator has selected
the desired group of machines,
they are asked to select the
machine for which they would
like to edit the Turn Setup. The
cursor can be moved one
machine at a time using the
arrow keys, or it can be moved
a full screen by using the
"PAGE UP/DOWN" keys. The
"HOME" and "END" keys
move the cursor to the
corresponding point in the
machine list.
When the cursor is
highlighting the desired
machine, press "ENTER" to
edit the Turn Setup for the selected machine, or press "EXIT" to abort the function.
Here the operator can edit the
Egg Turn Setup for the
specified machine. The default
variables shown under the
cursor can be used by
selecting "ENTER", or new
variables can be entered using
the "SELECT" key or typing a
new number. Egg Turning can
be enabled or disabled. Egg
turning can be disabled
between day 14 and day 18.
The Egg Turn interval can be
set to either 15, 30, 45, 60, 90, or
120 minutes using the
"SELECT" key. Pressing
"EXIT" will return to the
previous submenu without
making any changes to the Egg
Turn Setup.
For 'JM Turn Setup' refer to Appendix D on Page 120.

Figure 45: Machine Selection

Figure 46: Edit Egg Turn Setup

Sentry Control System 31