If a profile is being executed
on the machine, press the
"SELECT" key and then
choose 'Profile' from the menu
to view the profile currently
active on the machine. An
error message results if the
machine is not executing a
profile. A diamond shaped
character located to the left of
the day field indicates the
current position in the profile.
Pressing the "EXIT" key
returns the user to the
'Machine State' screen.
Pressing the "SELECT" key at
any point brings up a menu of
commonly used functions that
can be used to edit the configuration of the selected machine.
3.2 Change Setpoints
The 'Change Setpoint'
function allows the desired
temperature, humidity, and
damper targets to be set. These
settings will remain in effect
until they are changed, or until
a profile is started. To select
the 'Change Setpoint'
function, use the "UP/DOWN"
arrow keys. Pressing "ENTER"
begins the process of
changing the setpoint of a
specific machine.
Figure 5: View Profile
Figure 6: Change Setpoints
Sentry Control System 11